CONTACT US
8051 Microcontroller Training System
A
8051 family of microcontrollers and its derivatives are increaingly becoming popular for instrumentation and control applications due to its speed and powerful instruction set which are essetial for real-time applications This has created the need for a good trainer and development tools. uC-51 provides complete solution for this requirement. It can be used as flexible instructional aid in academic institutions and a powerful development board in R&D Labs. uC-51 has on-board DAC, ADC (optional) and parallel printer interface. The system firmware provides keyboard monitor, serial monitor, one line assemblerm disassembler and drivers for EPROM programmer and prallel printer interfaces. It is supplied with comprehensive and user-friendly documentation as well as Linux and Windows based communication software with on-line help.
• uC51 operates on a single +5V Power supply either in stand-alone mode using PC keyboard and LCD or with host PC through its RS-232C/RS-485 interface in serial mode. • Keyboard and serial monitor programs support the entry of user programs, editing and debugging facilities like breakpoints (128K), single stepping and full speed execution of user programs. • Line Assembler & Disassembler in both standalone & serial modes • Total on-board memory is 128K bytes of which 88K bytes RAM has battery backup provision. • On-board parallel printer port. • On-board 8 bit DAC using DAC0800 • Optional on-board 12 bit ADC using AD1674 • 48 I/O lines and four programmable interval timers • 13 port lines of the MCU are bough out to the connector including INT1, RXD & TXD pins (6 lines are shared for optional 12 bit ADC) • Buffered bus signals are avilable through ribbon cable connector for easy system expansion • User friendly windws, Linux and DOS driver software for file upload / download to / from host PC.
MAIN BOARD FEATURES:
DESCRIPTIONS :
• Central processor: 8051 @ 11.0592MHz • Memory: Four 28 pin JEDEC sockets - ROM and RAM • Program Memory - ROM: 32K Bytes of system firmware using 27C256 - RAM: 32K bytes using 62256 • Data Memory - RAM: 64K Bytes using 62256 (32Kx2). Upper most 8K bytes are reserved for I/O addressing and I/O expansion. • 8155 : Static HMOS 256 bytes RAM with I/O ports and timer. RAM reserved for monitor, 14 bit timer is availalbe for user and port lines are used for DAC and ADC. • 8255: PPI three nos. Two nos are for user, one supplied; another for user expansion. The remaining one is used for parallel printer and optional LCD. • 8253: Programmable interval timer. Three 16 bit programmable timers available for user. • 2681: Dual channel UART for serial, RS232C & RS485 communication supporting all standard bauds from 110 to 19200 • 8042: Universal Peripheral Interface used to interface PC keyboard in stand-alone mode. • ADC 1674: 12 bit ADC, 10us (optional) • DAC0800: 8 bit DAC • External: INT0 is used for implementing single stepping, breakpoints and user’s BREAK switch. INT1 is available to user. • Internal: On chip timer and serial interrupts are available to user. • Bus: STD BUS compatible bus signals available through a 50 pin ribbon cable connector. • Single chip mode: MCU port lines available through a 50 pin ribbon cable connector • Parallel I/O: 48 TTL compatible lines ( 2 x 8255) brought out through two 26 pin ribbon cable connectors. • Serial I/O: RS-232C through on-board 9-pin D-type female connector. RS485 through on-board 9-pin D-type male connector Optional on chip serial port adaptor for extra RS232 port. •Printer: PC compatible parallel printer interface available on a 25 pin D type female connector. • TImer Signals: Four Timers, Three from 8253 and one from 8155 are available at the 50 pin ribbon cable connectors. • Analog Signals: 8 analog inputs for ADC are fed through on-board terminal blocks. DAC Output is available through a test point • Power Supply: +5V @1.6A (Max) • Requirement: ±12V @ 100mA (max) for ADC and DAC • Dimension: (L) 365mm X (B) 275mm X (H) 55mm • Weight: 1.2KG • Interface application modules : Logic I/O Controller, Musical Tone Generator, LCD, 7-Segment Display, Traffic Light, Analog & Digital converter, DAC for ADC & Temperature Sensor, Digital Analog Converter, Elevator, Keyboard Scanning & Display, Calculator Keyboard, Real time clock. PRODUCT ACCESSORIES: • Operational/User Manual x1 • CD with PC driver software & sample programs • RS232 cable (1 set) • Power Supply unit (output: +5VDC/3A, ±12VDC/0.25A, 30VDC/0.1A) x1 • 8051 instruction list code card • USB-RS232 converter (optional)
SPECIFICATIONS:
DONWLOAD DONWLOAD
MODEL: ESA-51
MICROPROCESSOR & MICROCONTROLLER MICROPROCESSOR & MICROCONTROLLER
FPGA TRAINING SYSTEM FPGA TRAINING SYSTEM
ROBOTIC ROBOTIC
DIGITAL & ANALOGUE DIGITAL & ANALOGUE
ELECTRICS & ELECTRICITY ELECTRICS & ELECTRICITY
POWER ELECTRONIC POWER ELECTRONIC
AC & DC MACHINE TRAINER AC & DC MACHINE TRAINER
PLC & APPLICATION PLC & APPLICATION
ELECTRO PNEUMATIC TRAINING SYSTEM ELECTRO PNEUMATIC TRAINING SYSTEM
COMPUTER & COMMERCIAL ELECTRONICS COMPUTER & COMMERCIAL ELECTRONICS
ELECTRONIC LAB-BENCH ELECTRONIC LAB-BENCH
TELECOMMUNICATION TELECOMMUNICATION
TEST & DEVELOPMENT TOOLS TEST & DEVELOPMENT TOOLS
IOT TRAINING SYSTEM IOT TRAINING SYSTEM
CELLULAR MOBILE TRAINING KIT CELLULAR MOBILE TRAINING KIT
AUTOMATION STUDIO SOFTWARE AUTOMATION STUDIO SOFTWARE
EXPERIMENT INTERFACE MODULE (OPTIONAL) :
ABLELOGIC.COM.MY
ABLELOGIC.COM.MY
ABLELOGIC.COM.MY
ABLELOGIC.COM.MY
CONTACT US
8051 MICROCONTROLLER TRAINING SYSTEM
DONWLOAD DONWLOAD
MODEL: ESA-51
CONTACT US
PRODUCT MENU PRODUCT MENU
8051 family of microcontrollers and its derivatives are increaingly becoming popular for instrumentation and control applications due to its speed and powerful instruction set which are essetial for real-time applications This has created the need for a good trainer and development tools. uC-51 provides complete solution for this requirement. It can be used as flexible instructional aid in academic institutions and a powerful development board in R&D Labs. uC-51 has on-board DAC, ADC (optional) and parallel printer interface. The system firmware provides keyboard monitor, serial monitor, one line assemblerm disassembler and drivers for EPROM programmer and prallel printer interfaces. It is supplied with comprehensive and user-friendly documentation as well as Linux and Windows based communication software with on-line help.
• uC51 operates on a single +5V Power supply either in stand-alone mode using PC keyboard and LCD or with host PC through its RS-232C/RS-485 interface in serial mode. • Keyboard and serial monitor programs support the entry of user programs, editing and debugging facilities like breakpoints (128K), single stepping and full speed execution of user programs. • Line Assembler & Disassembler in both standalone & serial modes • Total on-board memory is 128K bytes of which 88K bytes RAM has battery backup provision. • On-board parallel printer port. • On-board 8 bit DAC using DAC0800 • Optional on-board 12 bit ADC using AD1674 • 48 I/O lines and four programmable interval timers • 13 port lines of the MCU are bough out to the connector including INT1, RXD & TXD pins (6 lines are shared for optional 12 bit ADC) • Buffered bus signals are avilable through ribbon cable connector for easy system expansion • User friendly windws, Linux and DOS driver software for file upload / download to / from host PC.
MAIN BOARD FEATURES:
DESCRIPTIONS :
SPECIFICATIONS:
EXPERIMENT INTERFACE MODULE (OPTIONAL) :
• Central processor: 8051 @ 11.0592MHz • Memory: Four 28 pin JEDEC sockets - ROM and RAM • Program Memory - ROM: 32K Bytes of system firmware using 27C256 - RAM: 32K bytes using 62256 • Data Memory - RAM: 64K Bytes using 62256 (32Kx2). Upper most 8K bytes are reserved for I/O addressing and I/O expansion. • 8155 : Static HMOS 256 bytes RAM with I/O ports and timer. RAM reserved for monitor, 14 bit timer is availalbe for user and port lines are used for DAC and ADC. • 8255: PPI three nos. Two nos are for user, one supplied; another for user expansion. The remaining one is used for parallel printer and optional LCD. • 8253: Programmable interval timer. Three 16 bit programmable timers available for user. • 2681: Dual channel UART for serial, RS232C & RS485 communication supporting all standard bauds from 110 to 19200 • 8042: Universal Peripheral Interface used to interface PC keyboard in stand-alone mode. • ADC 1674: 12 bit ADC, 10us (optional) • DAC0800: 8 bit DAC • External: INT0 is used for implementing single stepping, breakpoints and user’s BREAK switch. INT1 is available to user. • Internal: On chip timer and serial interrupts are available to user. • Bus: STD BUS compatible bus signals available through a 50 pin ribbon cable connector. • Single chip mode: MCU port lines available through a 50 pin ribbon cable connector • Parallel I/O: 48 TTL compatible lines ( 2 x 8255) brought out through two 26 pin ribbon cable connectors. • Serial I/O: RS-232C through on-board 9-pin D-type female connector. RS485 through on-board 9-pin D-type male connector Optional on chip serial port adaptor for extra RS232 port. •Printer: PC compatible parallel printer interface available on a 25 pin D type female connector. • TImer Signals: Four Timers, Three from 8253 and one from 8155 are available at the 50 pin ribbon cable connectors. • Analog Signals: 8 analog inputs for ADC are fed through on-board terminal blocks. DAC Output is available through a test point • Power Supply: +5V @1.6A (Max) • Requirement: ±12V @ 100mA (max) for ADC and DAC • Dimension: (L) 365mm X (B) 275mm X (H) 55mm • Weight: 1.2KG • Interface application modules : Logic I/O Controller, Musical Tone Generator, LCD, 7-Segment Display, Traffic Light, Analog & Digital converter, DAC for ADC & Temperature Sensor, Digital Analog Converter, Elevator, Keyboard Scanning & Display, Calculator Keyboard, Real time clock. PRODUCT ACCESSORIES: • Operational/User Manual x1 • CD with PC driver software & sample programs • RS232 cable (1 set) • Power Supply unit (output: +5VDC/3A, ±12VDC/0.25A, 30VDC/0.1A) x1 • 8051 instruction list code card • USB-RS232 converter (optional)
ABLELOGIC.COM.MY