To contact our team please call or

email us:

 No 81, Jalan 1, Taman Desa Jaya, Kepong, 52100 Kuala Lumpur, Malaysia  +603-6262 0413 (Whatsapp Available)  sales@vvtec.com or vvtecsb@gmail.com  http://www.ablelogic.com.my

FEATURES • This module unit can be activated to simulate the activation of the whole fire protection system real time. • This control panel works on 24VDC and is operated by 240VAC 50Hz power supply. In the event of power failure, back-up supply isavailable from stand-by battery pack. Unit will automatically switch to battery power when AC supply is interrupted therefore integrity of the system is maintained at all time. It will automatically revert to AC power when normal power supply is restored. At the same time back-up battery pack will automatically be re-charged to the regular level. • The panels come in various ranges from 2 zones as standard. Larger zones capacities are available to user's specification. Build-in mimic diagram with L.E.D indicator are located on the panel to show the location of the alarmed zone. It accepts a wide variety of detectors and sounding devices with line supervised output provided for zone and alarm bell circuits. Optional fire pump sets and auxiliary panel status can be monitored remotely. FIRE ALARM CONTROL 2 ZONE MODULE - FAC-02 • Main,Battery and System ON Indicators • Charger Fail Indicator • Main Fail Indicator • Gas Discharge Indicator • Countdown Timer Indicator(Programmable) • Zone Fire,Fault, and Isolate Indicators • Low Pressure Indicator • General Alarm Indicator • General Fault Indicator • Gas Discharge Line Fault Indicator • Bell Isolate Push Button Switch and Indicator • Master Reset Keypad • Gas Isolation Push Button Switch and Indicator • Buzzer Mute Keypad • Lamp Test Keypad • Battery Test Keypad • Main ON/OFF Switch (Build-In) • MFAP Isolate Switch (Build-In) • Earth Fault Indicator • FAP Isolate Indicator • Power Supply Input : 240VAC/50Hz • Operating System : 24VDC • Standby Mode : -Master : 75mA, Per Zone (c/wdetector) : 5mA, Flashing Light : 75mA. • Gas / Alarm signal : N/O Contact SMOKE DETECTOR MODULE - MODEL : SDM-01 • Come with Fault Switch • Normal rated Voltage 24 VDC • Operating Voltage 9.6 – 30 VDC • Typical Quiescent Current (24V) ≤ 65uA • Typical Alarm Current (24V) 18 - 22mA max (Typical 20mA) HEAT DETECTOR MODULE - MODEL : HDM-01 • Come with Fault Switch • Normal Rated Voltage 24 VDC • Operating Voltage 9.6 – 30 VDC • Typical Quiescent Current (24V) ≤ 35uA • Typical Alarm Current (24V) 18 - 22mA max (Typical 20mA) FLASHING LIGHT MODULE - MODEL : FLM-01 • Operating Voltage : 24 VDC • 1 Unit RED LED • 1 Unit GREEN LED ALARM BELL MODULE - MODEL : ABM-01 • Operating Voltage : 24 VDC • Dimension : 6 inch • Color : RED • Sound Level : 95dB MANUAL ALARM BUTTON (BREAKGLASS) MODULE - MODEL : BGM-01 • Operating Voltage : 24-36 VDC • Max Current : 10A • Color : RED BATTERY BACKUP MODULE - MODEL : ABM-01 • Voltage Output : 24 VDC • BLANKET TRIP Simulation SIMULATION MODULE - MODEL : SM-01 • Operating Voltage : 24 VDC • GAS Release Simulation • KEY Switch Simulation • FAN Trip Simulation EXPERIMENT PANEL FRAME - MODEL : MR-002 • Din Standard A4 with 2 or 3 Layer • Side Frame: T Shape • Dimension: 1100mm approx. CONNECTING SAFETY LEAD- MODEL : SL-4MM • 4mm safety connecting leads • The set consists of connecting lead set in different coded colors and lengths chosen to allow the realization of all experiment manual. MANUAL & ACCESSORIES • Operation / User Manual x 1 • Lab Experiment Manual (with answer) x 1 • Connecting Lead x 1 Set • Power Cord x 1