Microcontroller & Microprocessor
MODEL: ARD-DEV-TK02A
ARDUINO MICROCONTROLLER
DEVELOPMENT KIT
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has
54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog
inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection,
a power jack, an ICSP header, and a reset button. It contains everything needed to
support the microcontroller; simply connect it to a computer with a USB cable or power
it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most
shields designed for the Arduino Uno, Duemilanove or Diecimila.
• Microcontroller - ATmega2560
• Operating Voltage - 5V
• Input Voltage (recommended) - 7-12V
• Input Voltage (limits) - 6-20V
• Digital I/O Pins - 16 (of which 14 provide PWM output)
• Analog Input Pins - 16
• DC Current per I/O Pin - 40 mA
• DC Current for 3.3V Pin - 50 mA
• Flash Memory - 256 KB
• SRAM - 8 KB
• EEPROM - 4 KB
• Clock Speed - 16 MHz
• 4 output LEDs
• 4 input switches
• 2 pushbuttons
• DC motor, 5V operated,
• Rated current: 40mA,
• Speed: approx 100 RPM(min.)
• DC Motor Driver
• Servo Motor with Driver
• Stepper Motor with Driver
• LCD Display (2x16)
• 3x4 Keypad Scanning
• Sensor modules: Temperature, Frame, Gas, Photoresitor (LDR), Humidity, 2 unit Relay
Control, Water Level Sensor, IR Sensor
• Application I/O Shield (AS-01)support for Arduino Mega 2560
• WIFI & SD CARD Module (WIFI-ARD and SDC-ARD)
MAIN BOARD FEATURES:
• 802.11 b/g/n
• Wi-Fi Direct (P2P), soft-AP
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier and matching network
• Integrated PLLs, regulators, DCXO and power management units
• +19.5dBm output power in 802.11b mode
• Power down leakage current of <10uA
• 1MB Flash Memory
• Integrated low power 32-bit CPU could be used as application processor
• SDIO 1.1 / 2.0, SPI, UART
• STBC, 1×1 MIMO, 2×1 MIMO
• A-MPDU & A-MSDU aggregation & 0.4ms guard interval
WIFI MODULE FEATURES: