ADVANCED DIGITAL & ANALOG LAB TRAINER(16-BIT)

A
The DAT-300X is a robust and user -friendly digital analog trainer that consists of sufficient main components for user to use in building and constructing digital and analog electronics circuits and its application. It is suitable & widely use as a base in conducting practical digital and analog electronics courses. Coupled with its built-in power supplies, function generator, input switches, pulse switches, output LEDs, prototyping board & other  components, the DAT-300X is indeed a proven tool in helping users to get their digital or analog electronics courses started without haste.
DESCRIPTIONS :
DONWLOAD DONWLOAD
MODEL: DAT-300X
TECHNICAL SPECIFICATIONS:
ABLELOGIC.COM.MY
1. Solderless Breadboard Interconnected nickel plated contact with 1680 tie-points     (removable type) 2. DC Power Supply: (i) Variable 0 ~ ±20VDC/500mA (ii) Fixed ±5VDC/1A; ±12VDC/0.5A 3. AC Power Supply: 12V-0-12V/500mA 9V-0-9V/500mA (optional) 4. Sixteen (16)-Bits Logic Buffered Output LEDs 5. Sixteen (16)-Bits Data Input Switches 6. Two (2) Pulse Switches 7. Waveform/Function Generators(2 sets): (i) Frequency Range: 1Hz ~ 10Hz        (5 ranges) 10Hz ~ 100Hz 100Hz ~ 1KHz 1KHz ~ 10KHz 10KHz ~ 100KHz (ii) Output Waveform (with amplitude control): - Sine wave (approx. 18Vpp max.) - Square wave (approx. 18Vpp max.) - Triangle wave (approx. 16Vpp max.) - TTL output mode (TTL 5V output level) 8. Potentiometer: (i) 1 K Ohm – 1x (ii) 10K Ohm – 1x (iii) 100K Ohm – 1x (iv) 1M Ohm – 1x 9. Two function switches providing +5V/0/-5V levels 10. RC Configurable Timer Circuit Module 11. Intelligent Logic Probe to detect High, Low & Floating Logic Levels 12. Two (2) Digits 7-Segment LED Display with BCD driver & Binary-Hex driver 13. Built-in Digital Multimeter: (i) Display: 3.5 digit LCD (ii) DC Voltage: 200 mV / 2000 mV / 20 V / 200 V / 1000V (iii) DC Current: 2000μA / 20mA /200mA /10A (iv) AC Voltage: 200V / 750V (v) Resistance: 200Ω / 2KΩ / 20KΩ / 200KΩ / 2000KΩ 14. Analogue Multimeter for measuring DC voltage/current, AC voltage and resistance 15. Built-in continuity tracer 16. Built-in Speaker (8 Ohm, 0.25W) 17. 4mm Banana Sockets – 2 x 18. BNC connectors – 2x 19. Switches: Slide switch 2 position(2x), toggle switch 2 position(2x) 20. Audio stereo input socket interface for L/R/Gnd (x1) 21. Input Supply: 240VAC/50Hz; with overload/short circuit fuse protection (Mains        On/Off switch with indicator) 22. Dimension: 540mm x 230mm x 125mm(WxDxH)
1. User/Operational Manual x1 2. Mains Power Cord x1 3. Spare fuse x2
PRODUCT ACCESSORIES
ADVANCED DIGITAL & ANALOG LAB TRAINER(16-BIT)  
DONWLOAD DONWLOAD
PRODUCT MENU PRODUCT MENU
MODEL: DAT-300X
The DAT-300X is a robust and user -friendly digital analog trainer that consists of sufficient main components for user to use in building and constructing digital and analog electronics circuits and its application. It is suitable & widely use as a base in conducting practical digital and analog electronics courses. Coupled with its built-in power supplies, function generator, input switches, pulse switches, output LEDs, prototyping board & other  components, the DAT-300X is indeed a proven tool in helping users to get their digital or analog electronics courses started without haste.
DESCRIPTIONS :
TECHNICAL SPECIFICATIONS:
1. Solderless Breadboard Interconnected nickel plated contact with 1680 tie-points     (removable type) 2. DC Power Supply: (i) Variable 0 ~ ±20VDC/500mA (ii) Fixed ±5VDC/1A; ±12VDC/0.5A 3. AC Power Supply: 12V-0-12V/500mA 9V-0-9V/500mA (optional) 4. Sixteen (16)-Bits Logic Buffered Output LEDs 5. Sixteen (16)-Bits Data Input Switches 6. Two (2) Pulse Switches 7. Waveform/Function Generators(2 sets): (i) Frequency Range: 1Hz ~ 10Hz        (5 ranges) 10Hz ~ 100Hz 100Hz ~ 1KHz 1KHz ~ 10KHz 10KHz ~ 100KHz (ii) Output Waveform (with amplitude control): - Sine wave (approx. 18Vpp max.) - Square wave (approx. 18Vpp max.) - Triangle wave (approx. 16Vpp max.) - TTL output mode (TTL 5V output level) 8. Potentiometer: (i) 1 K Ohm – 1x (ii) 10K Ohm – 1x (iii) 100K Ohm – 1x (iv) 1M Ohm – 1x 9. Two function switches providing +5V/0/-5V levels 10. RC Configurable Timer Circuit Module 11. Intelligent Logic Probe to detect High, Low & Floating Logic Levels 12. Two (2) Digits 7-Segment LED Display with BCD driver & Binary-Hex driver 13. Built-in Digital Multimeter: (i) Display: 3.5 digit LCD (ii) DC Voltage: 200 mV / 2000 mV / 20 V / 200 V / 1000V (iii) DC Current: 2000μA / 20mA /200mA /10A (iv) AC Voltage: 200V / 750V (v) Resistance: 200Ω / 2KΩ / 20KΩ / 200KΩ / 2000KΩ 14. Analogue Multimeter for measuring DC voltage/current, AC voltage and resistance 15. Built-in continuity tracer 16. Built-in Speaker (8 Ohm, 0.25W) 17. 4mm Banana Sockets – 2 x 18. BNC connectors – 2x 19. Switches: Slide switch 2 position(2x), toggle switch 2 position(2x) 20. Audio stereo input socket interface for L/R/Gnd (x1) 21. Input Supply: 240VAC/50Hz; with overload/short circuit fuse protection (Mains        On/Off switch with indicator) 22. Dimension: 540mm x 230mm x 125mm(WxDxH)
1. User/Operational Manual x1 2. Mains Power Cord x1 3. Spare fuse x2
PRODUCT ACCESSORIES