ELAVATOR TRAINING SYSTEM

A
A self contained educational training system to demonstrate the basic concept & principal application of a elevator simulator using a controller system. It actually simulates an elevator control system consisting of four floors, fully equipped with moveable elevator door unit, motor drives, a controller system, user input request buttons, power supply unit & etc. User is able to write & download program to the system controller unit to simulate the actual result. This system is bundled with accessories, comprehensive manuals, sample programs and development software.
DESCRIPTIONS :
DONWLOAD DONWLOAD
MODEL: ELV-TK03
FEATURES
• Operation Manual x1 • Student Workbook with Experiment x1 • Connecting leads 4mm(1 set) • Mains power cord x1 • PLC Programming Cable x1 • Sample programs and datasheet on CD-ROM • PLC Programming Software(Demo ver.) • Optional Item: FPWIN GR PLC SOFTWARE (License)
PRODUCT ACCESSORIES
• Introduction to the basic components of a basic elevator system • Operation of the PLC controller unit • Operation of components of the system such as encoder, motor & drives, mechanical    parts & etc. • Identifying the I/O interface of the controller unit • Programming the PLC controller CPU (program settings, editing, downloading) • Running the program to simulate program end result • Troubleshooting program • Fault-finding & troubleshooting
ABLELOGIC.COM.MY
SPECIFICATIONS
• Main controller unit: OMRON Programmable Logic Controller CPU (Total inputs:    24 points, total outputs: 24 points) • PLC controller unit link to host computer via serial or USB interface (USB-RS232C    converter) • System Input voltage source: 240VAC/50Hz • Built-in 24VDC & 12VDC power supply • Simulates a four(4) level basic elevator system • One high torque DC motor coupled to an encoder for controlling the movement of     the cabin(lifter) unit • Four high torque DC motors are used to control the door's open/close operation for    all the 4 floors. • Limit switches are incorporated for door open/close sensing and cabin homing    location. • User's input pushbuttons available for simulation of cabin destination and also floor     calling request(8 pushbuttons, 8 lamp indicators) • Up/Down cabin movement lamp indicators • Seven segment display module for cabin floor position • Emergency pushbutton for immediate system stop/halt • Program supports manual mode for easy system maintenance and troubleshooting • System enable user to adjust the cabin stop position by adjusting the PLC memory    table program • Bundled with CX-Programmer PLC software • Relays are incorporated to enable the operation of each of the DC motor operations • Motor rating: 12VDC/1A, Approx 17 rpm, high torque type • Relays rating: DPDT (MY2N), 24VDC coil voltage • All connection between PLC and elevator base using 4mm connecting leads • Overall dimension: 1130mm(H) x 390mm(W) x 390mm(D) - main elevator unit    structure, 390mm(W) x 390mm(D) x 110mm(H) - interface unit base section.
ELAVATOR TRAINING SYSTEM
DONWLOAD DONWLOAD
MODEL: ELV-TK03
PRODUCT MENU PRODUCT MENU
A self contained educational training system to demonstrate the basic concept & principal application of a elevator simulator using a controller system. It actually simulates an elevator control system consisting of four floors, fully equipped with moveable elevator door unit, motor drives, a controller system, user input request buttons, power supply unit & etc. User is able to write & download program to the system controller unit to simulate the actual result. This system is bundled with accessories, comprehensive manuals, sample programs and development software.
DESCRIPTIONS :
FEATURES
• Introduction to the basic components of a basic elevator system • Operation of the PLC controller unit • Operation of components of the system such as encoder, motor & drives, mechanical    parts & etc. • Identifying the I/O interface of the controller unit • Programming the PLC controller CPU (program settings, editing, downloading) • Running the program to simulate program end result • Troubleshooting program • Fault-finding & troubleshooting
• Operation Manual x1 • Student Workbook with Experiment x1 • Connecting leads 4mm(1 set) • Mains power cord x1 • PLC Programming Cable x1 • Sample programs and datasheet on CD-ROM • PLC Programming Software(Demo ver.) • Optional Item: FPWIN GR PLC SOFTWARE (License)
PRODUCT ACCESSORIES
SPECIFICATIONS
• Main controller unit: OMRON Programmable Logic Controller CPU (Total inputs:    24 points, total outputs: 24 points) • PLC controller unit link to host computer via serial or USB interface (USB-RS232C    converter) • System Input voltage source: 240VAC/50Hz • Built-in 24VDC & 12VDC power supply • Simulates a four(4) level basic elevator system • One high torque DC motor coupled to an encoder for controlling the movement of     the cabin(lifter) unit • Four high torque DC motors are used to control the door's open/close operation for    all the 4 floors. • Limit switches are incorporated for door open/close sensing and cabin homing    location. • User's input pushbuttons available for simulation of cabin destination and also floor     calling request(8 pushbuttons, 8 lamp indicators) • Up/Down cabin movement lamp indicators • Seven segment display module for cabin floor position • Emergency pushbutton for immediate system stop/halt • Program supports manual mode for easy system maintenance and troubleshooting • System enable user to adjust the cabin stop position by adjusting the PLC memory    table program • Bundled with CX-Programmer PLC software • Relays are incorporated to enable the operation of each of the DC motor operations • Motor rating: 12VDC/1A, Approx 17 rpm, high torque type • Relays rating: DPDT (MY2N), 24VDC coil voltage • All connection between PLC and elevator base using 4mm connecting leads • Overall dimension: 1130mm(H) x 390mm(W) x 390mm(D) - main elevator unit    structure, 390mm(W) x 390mm(D) x 110mm(H) - interface unit base section.