FEATURES
• Integrated plenty electronic components that suited to Arduino learning.
• Integrate the WIFI feature to Arduino Uno to interface with application board for data input or data output and network accessibility.
• Capable real time monitoring data on browser page.
• Capable to control/alter the I/O (input/ouput) with programable microcontroller.
• Capable to develop individual application or interactive application.
• Local web server is created and provided for Raspberry Pi to develop a IOT application
• Development tools, sample code and lab exercises are provided.
IoT INTERFACE FEATURES
• Able to access data from web server (via URL)
• Accessible via any Android base smart phone (Smart phone is optional-sold separately)
• This development system using user’s own Smart Phone for browsing access for status viewing of I/O devices.
STUDY TOPIC COVERAGE
• Understand the basic of Internet of Things(IOT)
• Implementaon and applicaon of sensors
• Data capture from sensors
• Wireless connecvity of data uploading and I/O status viewing
• Control of output devices
• Using the web browser interface
• To enable user to develop web browser based basic interface(GUI) using free development tools
• Sample of web browser interface and program provided for IoT development
• Understand the basic ESP32 Kit
• Understand the basic Raspberry Pi Kit
EMBEDDED MICROCOMPUTER
• Processor: Broadcom BCM2837B0, Cortex-A53, 64-bit SoC @ 1.4GHz
• Memory: 1GB LPDDR2 SDRAM
• Connectivity: 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN,
Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps), 4 × USB 2.0 ports
• Access: Extended 40-pin GPIO header
• Video & sound: 1 × full size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output and composite video port
• Multimedia: H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics
• SD card support: Micro SD format for loading operating system and data storage
• Input power: 5V/2.5A DC via micro USB connector, 5V DC via GPIO header, Power over Ethernet (PoE)–enabled
(requires separate PoE HAT)
WIRELESS MODULE
• Chipset : ESP32-WROOM-32
• Wi-Fi Protocols : 802.11 b/g/n
• Mouting Pin for Microcontroller Module (EMC-01)
• Bluetooth Protocols :
▪ V4.2 BR/EDR & BLE specification
• Radio : NZIF receiver with -97dBm sensitivity
• Class-1, class-2 and class-3 transmitter AFH
• Intergrated crystal : 40MHz crystal
• Connector to application
APPLICATION MODULE
•
Gas Sensor
o
Good sensitivity to harmful gases
o
Sensor Type : Semiconductor
o
Working Supply : 5V
•
Buzzer
o
Passive Type
o
Working Supply : 5V
•
7 Segment Display
o
Common Cathode
o
Working Supply : 5V
•
Flame Sensor
o
Working Supply : 5V
o
•
Potentiomenter
o
Various Value of 1/4W potential meter
o
Working Supply : 3-5V
•
LDR Sensor
o
Diameter : 5mm
o
Working Supply : 5V
•
PIR Sensor
o
Output Voltage : 3.3V TTL
o
Operating Mode : Repeatable/ non repeatable
o
Cover distance : 120 degree wide and 7 meter distance long
•
LEDs
o
LED x 8
o
Working Supply : 3-5V
•
Tilt Sensor
o
TTL Level output
o
Working Supply : 5V
•
Temperature Sensor
o
Temperature Range : 0~50 Degree
o
Humidity Range : 20 ~ 90 percent
o
Working Supply : 5V
•
IR Remote with receiver
o
Has 10++ function keys
o
Working Supply : 5V
•
LCD
o
16 x 2 LCD Display with backlight
•
DC Motor
o
DC motor with driver circuit
IoT MONITORING SOFTWARE
•
ABL Ver 1.1
•
Support Mobile, Laptop and Tablet devices
MANUAL & ACCESSORIES
• USB download cable
• Ethernet cable
• User Manual & Experiment Lab Manual
• Power Supply Unit
• Software/Development Tool Installer
