TEACHING MODULE SPECIFICATION & EXPERIMENT COVERAGE
Module One: 1310 nm Optical Fibers Transmitter/1550 nm Optical Fibers Receiver
•
Transmitter Data Rate: 500 kbps.
•
Receiver Data Rate: 1 Mbps.
•
Input Signal Format: TTL Waveform.
•
Full Dulplex Transmission Structure.
•
Connector Type: SC Connector.
Module Two: 1550 nm Optical Fibers Transmitter/1310 nm Optical Fibers Receiver
•
Transmitter Data Rate: 1 Mbps.
•
Receiver Data Rate: 500 kbps.
•
Input Signal Format: TTL Waveform.
•
Simple Wavelength Division Multiplex (WDM) Characteristic.
•
Connector Type: SC Connector.
Module Three: Optical Fibers Audio Transceiver
•
Built-in Audio Generator.
•
Built-in Microphone Audio Input.
•
Input Signal Format: Sinusoidal Waveform.
•
Built-in 8 Ω Loud Speaker.
•
Continuous Variable Slope Delta (CVSD) Encoder and Decoder.
•
Sampling Rate: 200 kbps.
•
Operating with Module One and Module Two; Also operating independently in Itself.
Module Four: Optical Fibers Data Communication
•
Remote Control by Using 4-Key Simulator.
•
256 Types Data Sep-up.
•
8 LEDs Receiving Data Instructor.
•
4 LEDs Display for Remote Control Status.
•
Reciprocal (Interchangeable) Function for Transmitter and Receiver.
•
Operating with Module One and Module Two; Also Operating Independently in Itself.
Module Five: Optical Fibers Video Transmission
•
Operating System: Linux.
•
Video Transmission Type: Data.
•
ARM11 Microprocessor.
•
Data Rate: 1 Mbps.
TEACHING MODULE SPECIFICATION (OPTIONAL)
POWER SUPPLY MODULE
•
Variable Voltage Output:
•
0 ~ ± 12VDC/0.5A
•
Fixed Voltage Output:
•
± 5VDC(0.3A)
•
± 12VDC(0.3A)
•
Triple Bipolar Voltage Outputs
•
Constant Voltage Operations
•
Low Ripple & Noise
•
Connection using 4mm sockets
FUNCTION GENERATOR MODULE
•
Two signal output ports
•
Waveforms: Sine, Triangle, Square, TTL Pulse
•
Amplitude: >10Vpp
•
Impedance: 50Ω ± 10%
•
Duty Control: 30% - 60%
•
Frequency Range:
o
10Hz ~ 100kHz (4 Ranges)
o
100Hz ~ 1MHz (4 Ranges)
•
Accuracy: ± Time Base Count ± Count
•
Time Base: 60Hz Oscillation Frequency
•
Resolution: 0.1Hz, 1Hz, 10Hz, 100Hz, 1kHz
•
Frequency Control: Separate Coarse & Fine Tuning
•
Large 0.5” LED Display
•
Overload Protection
•
Built-in 6 Digits Frequency Counter
•
Connection using 4mm sockets
•
Power Requirements: 240VAC/50Hz
MANUAL & ACCESSORIES
• Operation / User Manual x 1
• Lab Experiment Manual (with answer) x 1
• Connecting Lead x 1 set
• Mouting Frame (MR-002) x 1 set(OPTIONAL)
