CONTACT US
POWER ELECTRONICS TRAINING SYSTEM
A
The PETK-900B Power Electronics Training System is a versatile, robust and easy to use training kits used for teaching, learning and constructing circuits based on power electronics theory and fundamentals. Suitable for basic power electronics circuit designs and application. The PETK-900B is a self-contained system, equipped with the power supply modules, various experiment plug in modules, user guide, experiment manual, connection cables and related accessories. For each experiment, circuits are constructed by the user using safety connection cables and built-in connector sockets to avoid any hazardous risk to the user and also the training kit itself. Each experiment is detailed in the lab workbook. Each of these modules can be directly placed on the laboratory lab bench or can be mounted onto an optional robust table top frame rack (ITEM: TFR- 001) when conducting experiments. Connection using 4mm sockets.
DESCRIPTIONS :
DONWLOAD DONWLOAD
MODEL: PETK-900B
TECHNICAL SPECIFICATIONS:
1. User/Operational Manual x1 2. Lab Experiment Manual x 1 3 Mains Power Cord x1 4. Safety Connection Lead Cable set 5. Mounting Frame - Metal 6. 12VDC 1A Power Adaptor 7. 1 AC main cord
PRODUCT ACCESSORIES
The following Power Electronics Experiments are covered used the various related training modules. These modules enable students to investigate a wide range of power electronics syllabus practical topics. Students investigate each topic with hands on experimentation, circuit construction and evaluation tasks which are provided in the experimental manual/workbook. Each module is equipped with clearly labeled block diagram and built-in connection interface and test points.
• 2 x 15V-0-15V AC output, maximum 800mA • ±12V DC power supply, maximum 1A • Input supply: Single phase 240VAC/50Hz • On/Off power switch with indicator • Fuse protection
SINGLE PHASE POWER SUPPLY [PETK-SPS-01]
• Star connected load x 1 • Delta connected load x1 • Resistor: 10KΩ/2W x1 • Capacitor:1000uF/50Vx1,10uF/50V x1 • Inductor: 1.5mH x1 , 3mH x1 • DC Fan x1 • Lamp bulb with socket x1
LOAD MODULE [PETK-LM-01]
• Control firing angle for SCR and TRIAC • Control duty cycle of PWM for chopper and inverter • Zero crossing detector • Switch for Mode selector • Reset button • Fuse protection • Isolation protection between control unit and application circuits • Suitable for single phase and three phase control application • Input power: 12VDC
FIRING CONTROL UNIT MODULE [PETK-FCU-01]
• SCR R and RC firing circuit • SCR: VDRM: 600V, IT(rms): 12A, ITAV : 8A, IGT: 15mA • Free wheeling Diode: VRRM : 50V, ITAV : 1A, IFSM : 30V • Built-in resistor, variable resistor and capacitor for thyristor R and RC firing • TRIAC circuit • TRIAC: VDRM = 500V, IT(rms) = 4A, IGT = 25mA
TYRISOTR (SCR) & TRIAC MODULE [PETK-MOD-01]
• UJT oscillator circuit. • UJT using 2N2647 • PUT oscillator circuit. • PUT using 2N6028 • Input: 12VDC
UJT & PUT MODULE [PETK-MOD-02]
• IGBT circuit. • IGBT: VCE = 600V, Ic = 10A, VCE(sat) = 1.5V, IF = 20A (Tc = 25 degree C), 10A(Tc = 100 degree C) • Power MOSFET circuit. • Power MOSFET: VDSS =55V, ID = 17A, RDS(on) = 0.07Ω
IGBT & POWER MOSFET MODULE [PETK-MOD-03]
• Single Phase Half-Wave Uncontrolled Rectifier using power diode • Single Phase Full-Wave Uncontrolled Rectifier using power diode • Single Phase Full-Wave Uncontrolled Bridge Rectifier using power diode • Power Diode: VRRM : 50V, ITAV : 1A, IFSM : 30A
SINGLE PHASE UNCONTROLLED RECTIFIER MODULE
[PETK-MOD-11]
• Single Phase Half-Wave Controlled Rectifier using Thyristor(SCR) • Single Phase Full-Wave Controlled Rectifier using Thyristor(SCR) • SCR: VDRM: 600V, IT(rms): 12A, ITAV : 8A, IGT: 15mA
SINGLE PHASE CONTROLLED RECTIFIER MODULE [PETK-MOD-12]
• Single Phase Half Controlled Bridge Rectifier using Thyristor(SCR) • Single Phase Fully Controlled Bridge Rectifier using Thyristor(SCR) • SCR: VDRM: 600V, IT(rms): 12A, ITAV : 8A, IGT: 15mA
SINGLE PHASE CONTROLLED BRIDGE RECTIFIER MODULE [PETK-MOD-13]
• Single Phase Bi-Direction AC Voltage Controller using TRIAC • Single Phase Uni-Direction AC Voltage Controller using TRIAC • Single Phase Frequency Converter using TRIAC • TRIAC: VDRM : 500V IT(RMS) = 4A, IGT = 25mA
SINGLE PHASE AC VOLTAGE CONTROLLER MODULE [PETK-MOD-14]
• Step-Down Chopper using Power MOSFET • Step-Down Chopper using IGBT • Step-Up Chopper using Darlington Transistor
DC CHOPPER MODULE [PETK-MOD-21]
• Single Phase Full Bridge Inverter. • Single Phase Half Bridge Inverter. • Inverter circuits using Power MOSFET
SINGLE PHASE BRIDGE INVERTER MODULE [PETK-MOD-22]
OPTIONAL ADD-ON MODULES
THREE PHASE EXPERIMENT MODULE SERIES : PETK-AM-01 • ITEM NO: PETK-MOD-23 • ITEM NO: PETK-MOD-31 • ITEM NO: PETK-MOD-32 • ITEM NO: PETK-MOD-33 • ITEM NO: PETK-TPS-01 SIMULATION SOFTWARE CONTROL PACKAGE • ITEM NO: PETK-SIM-01
ABLELOGIC.COM.MY
MICROPROCESSOR & MICROCONTROLLER MICROPROCESSOR & MICROCONTROLLER
FPGA TRAINING SYSTEM FPGA TRAINING SYSTEM
ROBOTIC ROBOTIC
DIGITAL & ANALOGUE DIGITAL & ANALOGUE
ELECTRICS & ELECTRICITY ELECTRICS & ELECTRICITY
POWER ELECTRONIC POWER ELECTRONIC
AC & DC MACHINE TRAINER AC & DC MACHINE TRAINER
PLC & APPLICATION PLC & APPLICATION
ELECTRO PNEUMATIC TRAINING SYSTEM ELECTRO PNEUMATIC TRAINING SYSTEM
COMPUTER & COMMERCIAL ELECTRONICS COMPUTER & COMMERCIAL ELECTRONICS
ELECTRONIC LAB-BENCH ELECTRONIC LAB-BENCH
TELECOMMUNICATION TELECOMMUNICATION
TEST & DEVELOPMENT TOOLS TEST & DEVELOPMENT TOOLS
IOT TRAINING SYSTEM IOT TRAINING SYSTEM
CELLULAR MOBILE TRAINING KIT CELLULAR MOBILE TRAINING KIT
AUTOMATION STUDIO SOFTWARE AUTOMATION STUDIO SOFTWARE
CONTACT US
CONTACT US
POWER ELECTRONICS TRAINING SYSTEM
DONWLOAD DONWLOAD
MODEL: PETK-900B
CONTACT US
PRODUCT MENU PRODUCT MENU
The PETK-900B Power Electronics Training System is a versatile, robust and easy to use training kits used for teaching, learning and constructing circuits based on power electronics theory and fundamentals. Suitable for basic power electronics circuit designs and application. The PETK-900B is a self-contained system, equipped with the power supply modules, various experiment plug in modules, user guide, experiment manual, connection cables and related accessories. For each experiment, circuits are constructed by the user using safety connection cables and built-in connector sockets to avoid any hazardous risk to the user and also the training kit itself. Each experiment is detailed in the lab workbook. Each of these modules can be directly placed on the laboratory lab bench or can be mounted onto an optional robust table top frame rack (ITEM: TFR-001) when conducting experiments. Connection using 4mm sockets.
DESCRIPTIONS :
TECHNICAL SPECIFICATIONS:
The following Power Electronics Experiments are covered used the various related training modules. These modules enable students to investigate a wide range of power electronics syllabus practical topics. Students investigate each topic with hands on experimentation, circuit construction and evaluation tasks which are provided in the experimental manual/workbook. Each module is equipped with clearly labeled block diagram and built-in connection interface and test points.
1. User/Operational Manual x1 2. Lab Experiment Manual x 1 3 Mains Power Cord x1 4. Safety Connection Lead Cable set 5. Mounting Frame - Metal 6. 12VDC 1A Power Adaptor 7. 1 AC main cord
PRODUCT ACCESSORIES
• 2 x 15V-0-15V AC output, maximum 800mA • ±12V DC power supply, maximum 1A • Input supply: Single phase 240VAC/50Hz • On/Off power switch with indicator • Fuse protection
SINGLE PHASE POWER SUPPLY [PETK-SPS-01]
• Star connected load x 1 • Delta connected load x1 • Resistor: 10KΩ/2W x1 • Capacitor:1000uF/50Vx1,10uF/50V x1 • Inductor: 1.5mH x1 , 3mH x1 • DC Fan x1 • Lamp bulb with socket x1
LOAD MODULE [PETK-LM-01]
• Control firing angle for SCR and TRIAC • Control duty cycle of PWM for chopper and inverter • Zero crossing detector • Switch for Mode selector • Reset button • Fuse protection • Isolation protection between control unit and application circuits • Suitable for single phase and three phase control application • Input power: 12VDC
FIRING CONTROL UNIT MODULE [PETK-FCU-01]
• SCR R and RC firing circuit • SCR: VDRM: 600V, IT(rms): 12A, ITAV : 8A, IGT: 15mA • Free wheeling Diode: VRRM : 50V, ITAV : 1A, IFSM : 30V • Built-in resistor, variable resistor and capacitor for thyristor R and RC firing • TRIAC circuit • TRIAC: VDRM = 500V, IT(rms) = 4A, IGT = 25mA
TYRISOTR (SCR) & TRIAC MODULE [PETK-MOD-01]
• UJT oscillator circuit. • UJT using 2N2647 • PUT oscillator circuit. • PUT using 2N6028 • Input: 12VDC
UJT & PUT MODULE [PETK-MOD-02]
• IGBT circuit. • IGBT: VCE = 600V, Ic = 10A, VCE(sat) = 1.5V, IF = 20A (Tc = 25 degree C), 10A(Tc = 100 degree C) • Power MOSFET circuit. • Power MOSFET: VDSS =55V, ID = 17A, RDS(on) = 0.07Ω
IGBT & POWER MOSFET MODULE [PETK-MOD-03]
• Single Phase Half-Wave Uncontrolled Rectifier using power diode • Single Phase Full-Wave Uncontrolled Rectifier using power diode • Single Phase Full-Wave Uncontrolled Bridge Rectifier using power diode • Power Diode: VRRM : 50V, ITAV : 1A, IFSM : 30A
SINGLE PHASE UNCONTROLLED RECTIFIER MODULE
• Single Phase Half-Wave Controlled Rectifier using Thyristor(SCR) • Single Phase Full-Wave Controlled Rectifier using Thyristor(SCR) • SCR: VDRM: 600V, IT(rms): 12A, ITAV : 8A, IGT: 15mA
SINGLE PHASE CONTROLLED RECTIFIER MODULE [PETK-MOD-12]
• Single Phase Half Controlled Bridge Rectifier using Thyristor(SCR) • Single Phase Fully Controlled Bridge Rectifier using Thyristor(SCR) • SCR: VDRM: 600V, IT(rms): 12A, ITAV : 8A, IGT: 15mA
SINGLE PHASE CONTROLLED BRIDGE RECTIFIER MODULE [PETK-MOD-13]
• Single Phase Bi-Direction AC Voltage Controller using TRIAC • Single Phase Uni-Direction AC Voltage Controller using TRIAC • Single Phase Frequency Converter using TRIAC • TRIAC: VDRM : 500V IT(RMS) = 4A, IGT = 25mA
SINGLE PHASE AC VOLTAGE CONTROLLER MODULE [PETK-MOD-14]
• Step-Down Chopper using Power MOSFET • Step-Down Chopper using IGBT • Step-Up Chopper using Darlington Transistor
DC CHOPPER MODULE [PETK-MOD-21]
• Single Phase Full Bridge Inverter. • Single Phase Half Bridge Inverter. • Inverter circuits using Power MOSFET
SINGLE PHASE BRIDGE INVERTER MODULE [PETK-MOD-22]
OPTIONAL ADD-ON MODULES
THREE PHASE EXPERIMENT MODULE SERIES : PETK-AM-01 • ITEM NO: PETK-MOD-23 • ITEM NO: PETK-MOD-31 • ITEM NO: PETK-MOD-32 • ITEM NO: PETK-MOD-33 • ITEM NO: PETK-TPS-01 SIMULATION SOFTWARE CONTROL PACKAGE • ITEM NO: PETK-SIM-01