DESCRIPTIONS :

STUDY TOPICS COVERAGE:

• Enable standalone operation with keypad • Can link to any PLCs for simple drive servo control system • Supports control commands and motion commands • User friendly programming language • To learn programming environment and debugging functions • Includes Servo Controller/Driver, Power Supply, Modules Mounting Frame, USB Programming cable, sensors, servo control software, instruction manual, AC sevo Motor, Linear Actuator(with coupling), switches & etc. to make this system functional

SMART SERVO DRIVER SOFTWARE INTERFACE

ACCESORIES

SERVO DRIVER FEATURES

1-AXIS LINEAR ACTUATOR MODULE FEATURES

SMART SERVO DRIVER MODULE

• Display: 6 Digits, 7 segment LED shows the servo status and parameters • Operation section use to pferform status display, diagnostic, alarm and parameter settingoperation • 1 x USB communication connector connects with personal computer • 1 x Mains input supply connector • 1 x RS485 communication port and 24V connector • 1 x Servo Motor power connector • 1 x Digital IO signal connector • 1 x encoder connector Module Included: • Mains input supply cable • Servo Motor power cable • Encoder cable • 1 x RS485 communication port and 24V connector • 1 x Servo Motor power connector • 1 x Digital IO signal connector • 1 x encoder connector • Mains input supply cable • Servo Motor power cable • Encoder cable

• User friendly graphical user interface • Auto recognition of communication format • Quick setup mode and graphical parameter setting • Auto tuning and manual tuning • Supports resonance point table reference • Waveform compare and monitoring functions • Provides function to configre, set and debug the user interface • Communication with PC using USB port • Quick setup mode & Graphical Parameter Settings : - Provides quick setup mode for configuration on screen with easy navigation and comprehensive interface. - Allows parameters setting to be visualized on the same page using the graphical parameter settings. User friendly interface. • Supports Auto Tuning : -Simple tuning can be done easily by specifying the automatic gain adjustment and 2 phase feedforward - Waveform comparison on the same screen • Software with built in analysis detect the resonance point of the machine. Can monitor Parallel I/O status, pulse train command, speed(Velocity), positioning/ feedback, torque and etc. • To perform these analysis, the motor will run in one direction according to position command and software records the behaviour of the axis. • All the recorded behaviour data are displayed in a graphical analysis screen with data. Recorded data/waveforms can viewed or compared. Software functionalities: i. Communication setting ii. Parameters setting iii. Waveform monitor and comparison iv. Status display v. Alarm setting vi. Test run vii. Auto tuning viii. Point table ix. Pulse, speed, torque command

• The servo drives is a compatible with the supplied servo motor unit, a solution for machines across a wide functionality range • Servo drives conform to CE standard • Applied functionalities: Position Control, Speed Control, Torque Control

SERVO MOTOR FEATURES

• Servo motor is a 3 phase synchronous motor • Equipped with high quality encoders • Servo motor designed to suit the requirement of any type of PLC

• With coupling • Actuator travelling stroke: Approx. 300mm • Drive pitch: Approx. 5mm • Actuator module dimension: 590mm(L) x 150mm(D) x 90mm(H) approx. • Travelling base dimension: 80mm(L) x 155mm(D) approx. • Housing: Aluminum profile • Trapezoidal screw: cold rolled steel • Fitted with inductive sensors(x4) • Sensor diameter: 12mm • Fitted with limit switch(x2) • Limit switch dimension: 20mm x 10mm

• PLC INTERFACE MODULE (Optional) - Central Processing Unit with 18 DC inputs / 12 transistor outputs/sinking) - CPU operating mode indicators; LED indicators for inputs/outputs - Built in 24VDC Power Supply (short circuit protection) with fuse protection - Power Indicator - 1x USB communication / Programming inteface port, 1 x RS232 port-programming capacity: 8K steps; - Data Memory capacity: 8K words - Built-in high speed counters (1000KHz x 2 inputs & 10KHz x 4 inputs) - Pulse outputs: Pulse + Direction Mode (1Hz to 100kHz: 2 outputs) - Inputs: 18 integrated standard 4mm connector sockets with COM - Output: 12 integrated standard 4mm connector sockets with COM - Support ladder programming software using CX-Progrmmer / CX-ONE (Optional)

OPTIONAL ITEM

• Bench top mounting frame rack i. LengthL Approx. 1000mm ii, Material: Aluminium iii. Side Frame: T-Mounting iv. Easy Slot in mounting for modules v. Tow Layer • User/Operation Manual • Lab Workbook • Servo Drive Software • Connecting Lead Cables • Cables for servo drive and servo motor • Mains cords